Filter
Top Products
DescriptionOption
Uses the UUID assigned to the server by the
manufacturer.
If you choose this option, the UUID remains
unassigned until the service profile is
associated with a server. At that point, the
UUID is set to the UUID value assigned to
the server by the manufacturer. If the service
profile is later moved to a different server, the
UUID is changed to match the new server.
Continue with Step 9.
Hardware Default
Uses the UUID that you manually assign.
Continue with Step 8.
XXXXXXXX-XXXX-XXXX-XXXX-XXXXXXXXXXXX
Assigns a UUID from the UUID Suffix pool
that you select from the list at the bottom of
the drop-down list.
Each pool name is followed by two numbers
in parentheses that show the number of UUIDs
still available in the pool and the total number
of UUIDs in the pool.
Continue with Step 9.
Pools Pool_Name
Step 8
(Optional) If you selected the XXXXXXXX-XXXX-XXXX-XXXX-XXXXXXXXXXXX option, do the
following:
a) In the UUID field, enter the valid UUID that you want to assign to the server which uses this service
profile.
b) To verify that the selected UUID is available, click the here link.
Step 9
Click OK.
Changing the UUID in a Service Profile Template
Procedure
Step 1
In the Navigation pane, click the Servers tab.
Step 2
On the Servers tab, expand Servers > Service Profile Templates.
Step 3
Expand the node for the organization that contains the service profile template for which you want to change
the UUID.
If the system does not include multitenancy, expand the root node.
Cisco UCS Manager GUI Configuration Guide, Release 2.0
548 OL-25712-04
Managing Service Profiles