Filter
Top Products
DescriptionName
The port through which Cisco UCS should communicate with the
TACACS+ database.
Enter an integer between 1 and 65535. The default port is 49.
Port field
The length of time in seconds the system should spend trying to
contact the TACACS+ database before it times out.
Enter an integer from 1 to 60 seconds, or enter 0 (zero) to use the
global timeout value specified on the TACACS+ General tab. The
default is 5 seconds.
Timeout field
b) Click OK.
Step 5
Click Save Changes.
What to Do Next
For implementations involving a single TACACS+ database, select TACACS+ as the primary authentication
service.
For implementations involving multiple TACACS+ databases, configure a TACACS+ provider group.
Deleting a TACACS+ Provider
Procedure
Step 1
In the Navigation pane, click the Admin tab.
Step 2
In the Admin tab, expand User Management > TACACS+.
Step 3
Right-click the TACACS+ provider you want to delete and choose Delete.
Step 4
If the Cisco UCS Manager GUI displays a confirmation dialog box, click Yes.
Configuring Multiple Authentication Systems
Multiple Authentication Systems
You can configure Cisco UCS to use multiple authentication systems by configuring the following features:
• Provider groups
• Authentication domains
Cisco UCS Manager GUI Configuration Guide, Release 2.0
146 OL-25712-04
Configuring Multiple Authentication Systems