Filter
Top Products
DescriptionName
Check the check box in this column for each VLAN you want to use.Select column
The name of the VLAN.Name column
To designate one of the VLANs as the native VLAN, click the radio
button in this column.
Native VLAN column
c) If you clicked the access radio button, choose a VLAN from the Select VLAN drop-down list.
Step 7
(Optional) If you want to add an endpoint, check the Ethernet Target Endpoint check box and complete
the following fields:
DescriptionName
The name of the endpoint.
This name can be between 1 and 16 alphanumeric characters. You
cannot use spaces or any special characters other than - (hyphen), _
(underscore), : (colon), and . (period), and you cannot change this name
after the object has been saved.
Name field
The MAC address for the endpoint.MAC Address field
Step 8
Click Next.
Step 9
In the Add Ports page of the Create Port Channel wizard, do the following:
a) In the Ports table, choose one or more ports to include in the port channel.
b) Click the >> button to add the ports to the Ports in the port channel table.
You can use the << button to remove ports from the port channel.
Cisco UCS Manager warns you if your configuration could cause issues with service profiles or
port configurations. You can click Yes in the dialog box if you want to create the port channel
despite those potential issues.
Note
Step 10
Click Finish.
Cisco UCS Manager GUI Configuration Guide, Release 2.0
102 OL-25712-04
Appliance Port Channels