Filter
Top Products
Step 4
Click the service profile to which you want to add the firmware packages.
Step 5
In the Work pane, click the Policies tab.
Step 6
Click the down arrows to expand the Firmware Policies section.
Step 7
To add a host firmware package, select the desired policy from the Host Firmware drop-down list.
Step 8
To add a management firmware package, select the desired policy from the Management Firmware drop-down
list.
Step 9
Click Save Changes.
Verifying Firmware Versions on Components
Procedure
Step 1
In the Navigation pane, click the Equipment tab.
Step 2
On the Equipment tab, click the Equipment node.
Step 3
In the Work pane, click the Firmware Management tab.
Step 4
On the Installed Firmware tab, review the firmware versions listed for each component.
Managing the Capability Catalog
Capability Catalog
The Capability Catalog is a set of tunable parameters, strings, and rules. Cisco UCS Manager uses the catalog
to update the display and configurability of components such as newly qualified DIMMs and disk drives for
servers.
The catalog is divided by hardware components, such as the chassis, CPU, local disk, and I/O module. You
can use the catalog to view the list of providers available for that component. There is one provider per
hardware component. Each provider is identified by the vendor, model (PID), and revision. For each provider,
you can also view details of the equipment manufacturer and the form factor.
For information about which hardware components are dependent upon a particular catalog release, see the
component support tables in the Service Notes for the B- Series servers. For information about which
components are introduced in a specific release, see the Cisco UCS Release Notes.
Contents of the Capability Catalog
The contents of the Capability Catalog include the following:
Cisco UCS Manager GUI Configuration Guide, Release 2.0
230 OL-25712-04
Verifying Firmware Versions on Components