Filter
Top Products
Server Ports
Configuring Server Ports
You can only configure server ports on the fixed port module. Expansion modules do not include server ports.
This task describes only one method of configuring ports. You can also configure ports from a right-click
menu, from the General tab for the port, or in the LAN Uplinks Manager.
Procedure
Step 1
In the Navigation pane, click the Equipment tab.
Step 2
In the Equipment tab, expand Fabric Interconnects > Fabric_Interconnect_Name > Fixed Module >
Unconfigured Ports.
Step 3
Click one or more ports under the Unconfigured Ports node.
Step 4
Drag the selected port or ports and drop them in the Server Ports node.
The port or ports are configured as server ports, removed from the list of unconfigured ports, and added to
the Server Ports node.
Uplink Ethernet Ports
Configuring Uplink Ethernet Ports
You can configure uplink Ethernet ports on either the fixed module or an expansion module.
This task describes only one method of configuring uplink Ethernet ports. You can also configure uplink
Ethernet ports from a right-click menu or from the General tab for the port.
Procedure
Step 1
In the Navigation pane, click the Equipment tab.
Step 2
On the Equipment tab, expand Equipment > Fabric Interconnects > Fabric_Interconnect_Name.
Step 3
Depending upon the location of the ports you want to configure, expand one of the following:
• Fixed Module
• Expansion Module
Step 4
Click one or more of the ports under the Unconfigured Ethernet Ports node.
If you want to reconfigure a server port, appliance port, or FCoE storage port, expand the appropriate node.
Step 5
Drag the selected port or ports and drop them in the Uplink Ethernet Ports node.
Cisco UCS Manager GUI Configuration Guide, Release 2.0
OL-25712-04 85
Server Ports