Filter
Top Products
Adding an NTP Server
Procedure
Step 1
In the Navigation pane, click the Admin tab.
Step 2
In the Admin tab, expand All.
Step 3
Click Timezone Management.
Step 4
In the Work pane, click the General tab.
Step 5
In the NTP Servers area, click the + button on the table icon bar.
Step 6
In the Add NTP Server dialog box, do the following:
a) In the NTP Server field, enter the IP address or hostname of the NTP server you want to use for this Cisco
UCS domain.
b) Click OK.
Deleting an NTP Server
Procedure
Step 1
In the Navigation pane, click the Admin tab.
Step 2
In the Admin tab, expand All.
Step 3
Click Timezone Management.
Step 4
In the Work pane, click the General tab.
Step 5
In the NTP Servers area, right-click the server you want to delete and select Delete.
Step 6
If the Cisco UCS Manager GUI displays a confirmation dialog box, click Yes.
Step 7
Click Save Changes.
Cisco UCS Manager GUI Configuration Guide, Release 2.0
576 OL-25712-04
Adding an NTP Server