Filter
Top Products
Procedure
Step 1
In the Navigation pane, click the Admin tab.
Step 2
On the Admin tab, expand All > User Management > RADIUS.
Step 3
Expand RADIUS Provider Groups.
Step 4
Right-click the RADIUS provider group you want to delete and choose Delete.
Step 5
If the Cisco UCS Manager GUI displays a confirmation dialog box, click Yes.
Creating a TACACS+ Provider Group
Creating a TACACS+ provider group allows you to authenticate using multiple TACACS+ databases.
Authenticating with a single TACACS+ database does not require you to set up a TACACS+ provider
group.
Note
Before You Begin
Create one or more TACACS+ providers.
Procedure
Step 1
In the Navigation pane, click the Admin tab.
Step 2
On the Admin tab, expand All > User Management > TACACS+.
Step 3
Right-click TACACS+ Provider Groups and choose Create TACACS+ Provider Group.
Step 4
In the Create TACACS+ Provider Group dialog box, do the following:
a) In the Name field, enter a unique name for the group.
This name can be between 1 and 127 ASCII characters.
b) In the TACACS+ Providers table, choose one or more providers to include in the group.
c) Click the >> button to add the providers to the Included Providers table.
You can use the << button to remove providers from the group.
d) After you have added all desired providers to the provider group, click OK.
Deleting a TACACS+ Provider Group
You cannot delete a provider group if it is being used by an authentication configuration.
Cisco UCS Manager GUI Configuration Guide, Release 2.0
OL-25712-04 149
Configuring Multiple Authentication Systems