Filter
Top Products
CHAPTER 12
Configuring DNS Servers
This chapter includes the following sections:
• DNS Servers in Cisco UCS , page 237
• Adding a DNS Server, page 237
• Deleting a DNS Server, page 238
DNS Servers in Cisco UCS
You need to specify an external DNS server for each Cisco UCS domain to use if the system requires name
resolution of hostnames. For example, you cannot use a name such as www.cisco.com when you are configuring
a setting on a fabric interconnect if you do not configure a DNS server. You would need to use the IP address
of the server.
Adding a DNS Server
Procedure
Step 1
In the Navigation pane, click the Admin tab.
Step 2
In the Admin tab, expand All > Communication Services.
Step 3
Click DNS Management.
Step 4
In the Work pane, click the General tab.
Step 5
In the DNS Server area, click +.
Step 6
In the Specify DNS Server dialog box, enter the IP address of the DNS server.
Step 7
Click OK.
Cisco UCS Manager GUI Configuration Guide, Release 2.0
OL-25712-04 237