Filter
Top Products
Modifying an Import Operation
Procedure
Step 1
In the Navigation pane, click the Admin tab.
Step 2
Click the All node.
Step 3
In the Work pane, click the General tab.
Step 4
In the Actions area, click Import Configuration.
Step 5
In the Import Operations area of the Import Configuration dialog box, click the import operation that you
want to modify.
The details of the selected import operation display in the Properties area. If the import operation is in a
disabled state, the fields are dimmed.
Step 6
In the Admin State field, click the enabled radio button.
Step 7
Modify the appropriate fields.
You do not have to enter the password unless you want to run the import operation immediately.
Step 8
(Optional) If you do not want to run the import operation immediately, click the disabled radio button in the
Admin State field.
Step 9
Click OK.
Deleting One or More Import Operations
Procedure
Step 1
In the Navigation pane, click the Admin tab.
Step 2
Click the All node.
Step 3
In the Work pane, click the General tab.
Step 4
In the Actions area, click Import Configuration.
Step 5
In the Import Operations table of the Backup Configuration dialog box, click the import operations that
you want to delete.
You cannot click an import operation in the table if the admin state of the operation is set to Enabled.Tip
Step 6
Click the Delete icon in the icon bar of the Import Operations table.
Step 7
If the Cisco UCS Manager GUI displays a confirmation dialog box, click Yes.
Step 8
In the Import Configuration dialog box, click one of the following:
DescriptionOption
Deletes the selected import operations without closing the dialog box.
Apply
Cisco UCS Manager GUI Configuration Guide, Release 2.0
630 OL-25712-04
Import Operations