Filter
Top Products
assign-default-role
Does not restrict user access to Cisco UCS Manager based on user roles. Read-only access is granted
to all users unless other user roles have been defined in Cisco UCS Manager.
This is the default behavior.
no-login
Restricts user access to Cisco UCS Manager based on user roles. If user roles have not been assigned
for the remote authentication system, access is denied.
Configuring the Role Policy for Remote Users
Procedure
Step 1
In the Navigation pane, click the Admin tab.
Step 2
On the Admin tab, expand All > User Management > Authentication.
Step 3
Click Native Authentication.
Step 4
In the Work pane, click the General tab.
Step 5
In the Role Policy for Remote Users field, click one of the following radio buttons to determine what happens
when a user attempts to log in and the remote authentication provider does not supply a user role with the
authentication information:
• No Login—The user is not allowed to log in to the system, even if the username and password are
correct.
• Assign Default Role—The user is allowed to log in with a read-only user role.
Step 6
Click Save Changes.
Cisco UCS Manager GUI Configuration Guide, Release 2.0
154 OL-25712-04
Selecting a Primary Authentication Service