Filter
Top Products
DescriptionName
The username the system should use to log in to the remote server. This
field does not apply if the protocol is TFTP.
User field
The password for the remote server username. This field does not apply
if the protocol is TFTP.
Password field
For each box that is checked, then the system creates a SEL backup
when that event is encountered:
• Log Full—The log reaches the maximum size allowed.
• On Change of Association—The association between a server
and its service profile changes.
• On Clear—The user manually clears a system event log.
• Timer—The time interval specified in the Backup Interval
drop-down list is reached.
Action option box
Click this button to reset the background configuration information.Reset Configuration button
Step 7
Click Save Changes.
Managing the System Event Log for a Server
Copying One or More Entries in the System Event Log
This task assumes that you are viewing the system event log for a server from the SEL Logs tab for a server
or a chassis.
Procedure
Step 1
After Cisco UCS Manager GUI displays the system event log in the SEL Logs tab, use your mouse to highlight
the entry or entries that you want to copy from the system event log.
Step 2
Click Copy to copy the highlighted text to the clipboard.
Step 3
Paste the highlighted text into a text editor or other document.
Cisco UCS Manager GUI Configuration Guide, Release 2.0
698 OL-25712-04
Managing the System Event Log for a Server