Filter
Top Products
b) Click Next.
Step 6
In the Threshold Definitions page, do the following:
a) Click Add.
The Create Threshold Definition dialog box opens.
b) From the Property Type field, choose the threshold property that you want to define for the class.
c) In the Normal Value field, enter the desired value for the property type.
d) In the Alarm Triggers (Above Normal Value) field, check one or more of the following check boxes:
• Critical
• Major
• Minor
• Warning
• Condition
• Info
e) In the Up and Down fields, enter the range of values that should trigger the alarm.
f) In the Alarm Triggers (Below Normal Value) field, check one or more of the following check boxes:
• Info
• Condition
• Warning
• Minor
• Major
• Critical
g) In the Up and Down fields, enter the range of values that should trigger the alarm.
h) Click Finish Stage.
i) Do one of the following:
• To define another threshold property for the class, repeat Step 6.
• If you have defined all required properties for the class, click Finish Stage.
Step 7
In the Create Threshold Class page of the Create Threshold Policy wizard, do one the following:
• To configure another threshold class for the policy, repeat Steps 5 and 6.
• If you have configured all required threshold classes for the policy, click Finish.
Cisco UCS Manager GUI Configuration Guide, Release 2.0
OL-25712-04 673
Configuring Statistics Threshold Policies