Filter
Top Products
• The vNIC or vHBA is assigned to a different pool.
Procedure
Step 1
In the Navigation pane, click the SAN tab.
Step 2
On the SAN tab, expand SAN > Pools.
Step 3
Expand the node for the organization containing the pool.
If the system does not include multitenancy, expand the root node.
Step 4
Expand the IQN Pools node.
Step 5
Choose the IQN pool for which you want to delete a block of IQN suffixes.
Step 6
In the Work pane, click the IQN Blocks tab.
Step 7
Right-click the block to be deleted and select Delete.
Step 8
Click Yes to confirm the deletion.
Step 9
Click Save Changes.
Deleting an IQN Pool
If you delete a pool, Cisco UCS Manager does not reallocate any addresses from that pool that have been
assigned to vNICs or vHBAs. All assigned addresses from a deleted pool remain with the vNIC or vHBA to
which they are assigned until one of the following occurs:
• The associated service profiles are deleted.
• The vNIC or vHBA to which the address is assigned is deleted.
• The vNIC or vHBA is assigned to a different pool.
Procedure
Step 1
In the Navigation pane, click the SAN tab.
Step 2
On the SAN tab, expand SAN > Pools.
Step 3
Expand the node for the organization containing the pool.
If the system does not include multitenancy, expand the root node.
Step 4
Expand the IQN Pools node.
Step 5
Right-click the pool you want to delete and select Delete.
Step 6
If the Cisco UCS Manager GUI displays a confirmation dialog box, click Yes.
Cisco UCS Manager GUI Configuration Guide, Release 2.0
464 OL-25712-04
iSCSI Boot