Filter
Top Products
The details of the selected backup operation display in the Properties area. If the backup operation is in a
disabled state, the fields are dimmed.
Step 6
In the Admin State field, click the enabled radio button.
Step 7
Modify the appropriate fields.
You do not have to enter the password unless you want to run the backup operation immediately.
Step 8
(Optional) If you do not want to run the backup operation immediately, click the disabled radio button in
the Admin State field.
Step 9
Click OK.
Deleting One or More Backup Operations
Procedure
Step 1
In the Navigation pane, click the Admin tab.
Step 2
Click the All node.
Step 3
In the Work pane, click the General tab.
Step 4
In the Actions area, click Backup.
Step 5
In the Backup Operations table of the Backup Configuration dialog box, click the backup operations that
you want to delete.
You cannot click a backup operation in the table if the admin state of the operation is set to Enabled.Tip
Step 6
Click the Delete icon in the icon bar of the Backup Operations table.
Step 7
If the Cisco UCS Manager GUI displays a confirmation dialog box, click Yes.
Step 8
In the Backup Configuration dialog box, click one of the following:
DescriptionOption
Deletes the selected backup operations without closing the dialog box.
Apply
Deletes the selected backup operations and closes the dialog box.
OK
Import Operations
Creating an Import Operation
You cannot import a Full State configuration file. You can import any of the following configuration files:
• All configuration
• System configuration
Cisco UCS Manager GUI Configuration Guide, Release 2.0
626 OL-25712-04
Import Operations