Filter
Top Products
DEFINITY ECS Release 8.2
Administrator’s Guide
555-233-506
Issue 1
April 2000
Screen reference
1008Trunk Group
17
Receive Analog Incoming Call ID
Your switch stores and displays 15 characters of name and number information
associated with an incoming call on analog trunks (ICLID, or incoming call line
identification information). This field appears for CO, DID, and DIOD trunk
groups when the Analog Trunk Incoming Call ID field on the System-Parameters
Customer-Options screen is
y and the Direction field is incoming or two-way.
Incoming Tone (DTMF) ANI
This field appears only when the Incoming Dial Type field is
tone. Digits received
through Automatic Number Identification (ANI) are printed on a CDR record,
passed to the Intuity AUDIX and ASAI interfaces, and displayed on the phone
(and on tandem calls if the outgoing trunk requires ANI). Then the digits are sent
to the outgoing trunk.
Per Call CPN Blocking Code
For Access, APLT, CO, DIOD, FX, tandem, tie, and WATS trunk groups only.
Connected to CO
This field appears when the Group Type field is
tie.
Valid entries Usage
Bellcore
Used to collect ICLID information in the U.S.
NTT Used to collect ICLID information in Japan.
disabled
Stops the collection of ICLID information on analog trunks.
Valid entries Usage
*ANI*DNIS*
If 555-3800 calls extension 81120, the trunk group receives
*55538000*81120*. The phone displays Call from 555-3800.
ANI*DNIS*
If 555-3800 calls extension 81120, the trunk group receives
55538000*81120*. The phone displays Call from 555-3800.
no
Valid entries Usage
1 to 4 digit
number
*, #
May be used as the first digit
Valid entries Usage
y/n
Enter y to allow overlap sending to a Central Office.