Lucent Technologies 8.2 Security Camera User Manual


  Open as PDF
of 1707
 
DEFINITY ECS Release 8.2
Administrator’s Guide
555-233-506
Issue 1
April 2000
Enhancing system security
314Adding logins and passwords
11
16. Lucent recommends you administer the following on all voice mail ports:
Assign all voice mail ports a unique Class of Restriction. Refer to
‘‘
Class of Restriction’’ on page 520 for more information.
If you are not using outcalling, fax attendant, or networking,
administer the unique Class of Restriction where the FRL is
0, the
Calling Party Restriction field is
outward, and all unique trunk
group Class of Restriction on the Calling Permissions are
n. Refer to
‘‘
Class of Restriction’’ on page 520 for more information.
NOTE:
Lucent recommends you administer as many layers of security as
possible. You can implement steps 9
and 16 as a double layer of
security. In the event that the voice mail becomes unsecured for any
reason, the layer of security on the switch takes over, and vice versa.
17. Administer all fax machines, modems, and answering machines analog
voice ports as follows:
Set the Switchhook Flash field to n.
Set the Distinctive Audible Alert field to n. Refer to ‘‘Station’’ on
page 882 for more information.
18. Install a Call Accounting System to maintain call records. In the CDR
System Parameters screen, Record Outgoing Calls Only field, set to
y.
Refer to ‘‘
CDR System Parameters’’ on page 508 for more information.
NOTE:
Call Accounting Systems produce reports of call records. It detects
phones that are being hacked by recording the extension number, date
and time of the call, and what digits were dialed.
Adding logins and passwords
This section shows you how to add a user and their password. To add a login, you
must be a superuser with authority to administer permissions.
When adding logins, remember the following:
Type the new login name as part of the add command. The name must be
3–6 alphanumeric characters in length, and can contain the characters 0-9,
a-z, A-Z.
The password must be from 7 to 11 alphanumeric characters in length and
contain at least 1 non-alphabetic character.