Filter
Top Products
DEFINITY ECS Release 8.2
Administrator’s Guide
555-233-506
Issue 1
April 2000
Screen reference
495Attendant Console
17
dont-split
Don’t Split. This button allows the attendant to not split away a
call when dialing (1 per console).
vis
Visually Impaired Attendant Service (vis) — This button
activates visually impaired service for the attendant. When this
service is activated, the attendant can listen to console status or
messages by pressing buttons that have been translated as
follows:
■ "con-stat" repeats the console status.
■ "display" calls out display contents.
■ "dtgs-stat" calls out the DTGS status.
■ "last-mess" repeats the last message.
■ "last-op" calls out the last operation.
Trunk Group Select
— In addition to the 12 Direct Trunk Group Selection
(DTGS) Button Assignments on Field descriptions for page 1, up to 12 single
lamp DTGS buttons can be administered on this page. The status lamp associated
with the feature button is used to monitor the busy/idle status of the trunk. Trunk
groups administered on these buttons cannot be controlled using Attendant
Control of Trunk Group Select buttons. The single lamp DTGS buttons can be
administered as follows:
local-tgs
Local trunk group select; allows the attendant to access trunk
groups on the local switch (combination of 12
local-tgs/remote-tgs per console).
remote-tgs
Remote trunk group select; allows the attendant to access trunk
groups on a remote switch (combination of 12
local-tgs/remote-tgs per console).
Valid entries Usage