Filter
Top Products
DEFINITY ECS Release 8.2
Administrator’s Guide
555-233-506
Issue 1
April 2000
Features and technical reference
1254Call Detail Recording
20
Call detail record field descriptions
The following list describes the CDR data collected for each call and the number
of digits in each field. All information is right adjusted in the respective field,
unless otherwise indicated. Where the field name for customized records is
different from the standard, the custom field name appears in parentheses.
■ Access Code Dialed (code-dial) — 3 or 4 digits
The access code the user dialed to place an outgoing call. This can be the
ARS access code, AAR access code, or the access code of a specific trunk
group. This field is also used to record the X.25 Feature Access Code of an
outgoing X.25-addressed call.
■ Access Code Used (code-used) — 3 or 4 digits
This field is used only for outgoing calls when the trunk group used is
different from the access code dialed. It is not used when a TAC is dialed.
For example, your system may use a feature access code for ARS. This
field contains the access code of the actual trunk group that the call was
routed over. When the dialed and used access code are the same, this field
will be blank.
If you use ISDN or enhanced formats with TELESEER, LSU, or Printer
record types, this field always shows the access code of the trunk group,
even if it is the same as the access code dialed.
■ Account Code (acct-code) — up to 15 digits
This field may contain a number to associate call information with projects
or account numbers. For some formats, a long account code overwrites
spaces on the record that are assigned to other fields.
■ Attendant Console (attd-console) — 2 digits
This field contains the attendant console number of the attendant that
handled the call in a record that is marked as being attendant handled.
132 Carriage return
133 Line feed
134–136 Null
Table 44. CDR Data Format — Int-ISDN —
Continued
Position Data Field Description
Continued on next page