Filter
Top Products
DEFINITY ECS Release 8.2
Administrator’s Guide
555-233-506
Issue 1
April 2000
Managing phone features
69Telephone feature buttons
4
exclusion Exclusion Exclusion: allows multiappearance
telephone users to keep other users with
appearances of the same extension from
bridging onto an existing call.
If the user press the
EXCLUSION button
while other users are already bridged onto
the call, the other users are dropped.
There are two means of activating
exclusion.
■ Manual Exclusion — when the user
presses the
EXCLUSION button (either
before dialing or during the call).
■ Automatic Exclusion — as soon as the
user picks up the handset. To turn off
Automatic Exclusion during a call, the
user presses the
EXCLUSION button. To
use Automatic Exclusion, set the
Automatic Exclusion by COS field to
y on the Feature-Related System
Parameters screen.
1 per
station
ext-dn-dst Do Not
Disturb Ext
Extension — Do Not Disturb (display
button): used by the attendant console or
hotel front desk display phone to activate
do not disturb and assign a corresponding
deactivate time to an extension.
1 per
station
flash Flash 1) Allows a station on a trunk call with
Trunk Flash to send a Trunk Flash signal
to the far end (e.g., Central Office); 2)
allows a station on a CAS main call to
send a Trunk Flash signal over the
connected RLT trunk back to the branch to
conference or transfer the call.
1 per
station
Table 1. Telephone feature buttons —
Continued
Button name
Button
label Description Maximum
Continued on next page