Filter
Top Products
DEFINITY ECS Release 8.2
Administrator’s Guide
555-233-506
Issue 1
April 2000
Features and technical reference
1188Busy Indicator
20
■ Videophone 2500 (single-line telephones)
A user may not use an analog bridge to a Videophone 2500 principal that is
on a video call.
■ Voice Message Retrieval
A voice message to the primary extension can be retrieved on a bridged
appearance by the bridged appearance user. If a security code is required to
retrieve the message, the bridging user must use the security code of the
primary telephone.
■ Voice Paging
The use of Voice Paging automatically invokes exclusion. Therefore,
interactions for this feature are the same as for Privacy-Manual Exclusion.
Busy Indicator
The Busy Indicator button provides multiappearance telephone users and
attendants with a visual indicator of the busy or idle status of one of the following
system resources:
■ An extension number
■ A trunk group
■ A terminating extension group
■ A hunt group—either direct department calling (DDC) or uniform call
distribution (UCD)
■ Any loudspeaker paging zone, including all zones
The Busy Indicator button provides the attendant or user with direct access to the
extension number, trunk group, or paging zone.
You can assign extension numbers, trunk group access codes, and Loudspeaker
Paging access codes to a Busy Indicator button.
The Facility Busy lamp indication for a vector directory number (VDN) does not
light when the VDN is being used. The associated button may be used to place a
call to a VDN.