Filter
Top Products
DEFINITY ECS Release 8.2
Administrator’s Guide
555-233-506
Issue 1
April 2000
Screen reference
786Language Translations
17
Trunk Member Administration
Administer BRI trunk members using the following scheme to address the
individual B-channels:
■ B-channel 1 uses the port address of the BRI Trunk Port.
■ B-channel 2 uses the port address of B-channel 1 incremented by 16.
When adding a BRI trunk to an ISDN trunk-group, DEFINITY ECS blocks you
from administering a Signaling Group for that trunk member.
DEFINITY ECS blocks you from administering a BRI trunk member if the port
has not yet been administered on the BRI Trunk screen.
For example, administer the B-channels on a TN2185 circuit pack inserted in slot
01A10 as follows:
Interactions
The
add bri-trunk board PPCSS command is rejected if PPCSS identifies a
TN556B circuit pack, and a port on that circuit pack has already been assigned to
a station or data-module. If a TN556B circuit pack has been administered as a BRI
trunk circuit pack, any port on that circuit pack is prevented from being assigned
to a station or data-module.
Language Translations
When you want to use a language other than English, French, Italian, and Spanish
to display messages on your display phones, use the Language Translation screens
to define the messages. Set up your messages using Roman letters, punctuation,
digits and blank spaces. Diacritical marks are not supported.
Port B-channel 1 B-channel 2
1 01A1001 01A1017
2 01A1002 01A1018
3 01A1003 01A1019
4 01A1004 01A1020
5 01A1005 01A1021
6 01A1006 01A1022
7 01A1007 01A1023
8 01A1008 01A1024