Filter
Top Products
DEFINITY ECS Release 8.2
Administrator’s Guide
555-233-506
Issue 1
April 2000
Screen reference
527Class of Restriction
17
Fully Restricted Service
NOTE:
If this field is enabled, the APLT field must be n.
Category For MFC ANI
The Category for MFC ANI field always controls categories for Russian signaling
trunks. It also may control categories for R2-MFC signaling trunks, depending on
what value is in the Use COR for Calling Party Category field on the
system-parameters multi-frequency screen.
The Calling Party Category digit administered in this field is included as part of
the ANI information sent to the Central Office on request using R2-MFC
signaling.
Hear VDN of Origin Announcement
Send ANI for MFE
Only applicable for Spain. Valid for 2/6 signaling, but not 2/5 signaling. The
following field appears only if Expert Agent Selection (EAS) is enabled on the
Feature-Related System-Parameters screen.
Valid entries Usage
y/n
When y entered for a given COR, stations assigned that COR
will not have access to the public network for either incoming
or outgoing calls.
Valid entries Usage
1
–10 Used in other than U.S.
Valid entries Usage
y/n
Enter y if users with this COR can receive VDN of Origin
messages.
Valid entries Usage
y
Enter y to enable Automatic Number Identification (ANI). When
the value is
y, the switch sends the calling party’s number to the
public or IBERCOM network so that charges will be broken
down by line.
n
If this value is n, charges are not itemized by line, and your
company will receive a single bill for the total number of calls
made (block charging).