Filter
Top Products
DEFINITY ECS Release 8.2
Administrator’s Guide
555-233-506
Issue 1
April 2000
Setting up telecommuting
300Setting up remote access
10
10. Type 01/01/99 in the Expiration Date field.
This is the date the barrier code expires. A warning message is displayed on
the system copyright screen seven days before the expiration date. The
system administrator can modify the expiration date to extend the time
interval, if necessary.
11. Type
y in the Disable Following A Security Violation field.
This disables the remote access feature following detection of a remote
access security violation.
12. Press
ENTER to save your work.
Disabling remote access permanently
To disable remote access permanently:
1. Type
change remote-access and press RETURN.
The Remote Access
screen appears.
2. Type
y in the Permanently Disable field.
If you permanently disable this feature, it requires Lucent Services
intervention to reactivate the feature. There is a charge for reactivation of
this feature.
3. Press
ENTER to save your work.
!
CAUTION:
Your attempt to disable the Remote Access feature will be lost if the switch is
rebooted without saving translations. Therefore, execute a
save translation
command after permanently disabling the Remote Access feature.
More information
Remote Access provides you with access to the system and its features from the
public network. This allows you to make business calls from home or use
Recorded Telephone Dictation Access to dictate a letter. If authorized, you can
also access system features from any on-site extension.
With Remote Access you can dial into the system using Direct Inward Dialing
(DID), Central Office (CO), Foreign Exchange (FX), or 800 Service trunks. When
a call comes in on a trunk group dedicated to Remote Access, the system routes
the call to the Remote Access extension you have assigned. If DID is provided and
the Remote Access extension is within the range of numbers that can be accessed
by DID, Remote Access is accessed through DID.