Filter
Top Products
DEFINITY ECS Release 8.2
Administrator’s Guide
555-233-506
Issue 1
April 2000
Managing your attendant consoles
103Attendant console feature buttons
5
Visually Impaired
Service (VIAS)
VIS vis 1
Console Status con-stat 1
Display display 1
DTGS Status dtgs-stat 1
Last Message last-mess 1
Last Operation last-op 1
VDN of Origin
Announcement
Repeat
VOA Repeat voa-repeat 1
12
VuStats VuStats vu-display 1
N = any number of buttons on the phone can be assigned to this feature. For phone feature
button descriptions, refer to ‘‘
Telephone feature buttons’’ on page 58.
1. List: List number 1 to 3 where the destination number is stored.
DC: Dial codes of destination number.
2. Grp: The split group number for ACD.
3. Code: Enter a stroke code (0 through 9).
4. TAC: local-tgs — TAC of local TG
remote-tgs — (L-TAC) TAC of TG to remote PBX
remote-tgs — (R-TAC) TAC of TG on remote PBX
The combination of local-tgs/remote-tgs per console must not exceed 12 (maximum).
Label associated button appropriately so as to easily identify the trunk group.
5. Grp: Enter a hundreds group number (1 through 20).
6. Enhanced Hospitality must be enabled on the System-Parameters Customer-Options screen.
7. Ext: May be a VDN extension.
8. Link: A link number — 1 to 8 for multi-carrier cabinets, 1 to 4 for single-carrier cabinets.
9. Grp: A trunk group number.
10. Grp: Group number of the hunt group.
11. Allows the attendant to alternate between active and split calls.
12. VDN of Origin must be enabled.
Table 2. Attendant console feature buttons
Feature or
Function
Recommended
Button Label
Name Entered on
Station form
Maximum
Allowed Notes
Continued on next page