Filter
Top Products
DEFINITY ECS Release 8.2
Administrator’s Guide
555-233-506
Issue 1
April 2000
Screen reference
564Data modules
17
COS
Enter the desired class of service.
Remote Loop-Around Test
Used with Processor/Trunk and X.25 Data Modules. Appears when the Type field
is
pdm, tdm, or x.25.
Maintenance Extension
Used with Netcon and Processor Interface Data Modules.
x.25
Assigns an X.25 Data Module in G3r configurations for
communications to Adjuncts and other nodes in a DCS
network. Refer to DEFINITY ECS Administration for Network
Connectivity for more information on X.25 data modules.
Valid entries Usage
0
- 15 Select the allowed features.
Valid entries Usage
y/n
For Processor/Trunk Data Modules, enter y if the data module
supports a loop-back test at the EIA interface. In general,
Lucent Technologies equipment supports this test but it is not
required by Level 2 Digital Communications Protocol. Enter
n
to abort a request for this test.
y/n
For X.25 Data Modules, enter y to allow remote loop-around
tests on this port. Refer to the DEFINITY Enterprise
Communications Server Maintenance manual for more
information about remote loop-around tests. Enter
n to abort a
request for this test.
Valid entries Usage
Enter the extension number required to
perform maintenance functions on the
standby netcon physical channel in a
duplicated system.
The standby remote loop around
tests fails if this field is not
administered.
Valid entries Usage