Filter
Top Products
DEFINITY ECS Release 8.2
Administrator’s Guide
555-233-506
Issue 1
April 2000
Screen reference
761ISDN trunk group
17
Switching field is y on the System-Parameters Customer-Options screen. If set to
y, the Wideband Support Options page appears. All trunk members must be from
TN464C (or later) circuit packs.
NOTE:
Wideband trunk calls are treated as a single trunk call when Automatic
Circuit Assurance (ACA) measurements are taken. This way, if an ACA
referral call is generated (for short or long holding time), the wideband call
only triggers a single referral call using the lowest B-channel trunk member
associated with the wideband channel.
Field descriptions for the Shared UUI Feature
Priorities page
The fields in this page show the priorities for each type of information to be
forwarded in the Shared UUI. This page appears only on the ISDN trunk group
screen when all of the following conditions are met:
■ The UUI IE Treatment field is shared.
■ The Supplementary Service Protocol field is set to anything except b.
Screen 116. Shared UUI Feature Priorities
Changing the priorities in this screen may affect whether certain information will
be sent. For more information about setting priorities, refer to “Information
Forwarding” in DEFINITY ECS Guide to ACD Call Centers. These fields are
unique to the ISDN trunk group screen.
ASAI
User information from ASAI. Valid entries are
1 to 6 and blank. If blank, that
field’s information is not forwarded.
add trunk-group next Page y
of x
SHARED UUI FEATURE PRIORITIES
ASAI: 1
Universal Call ID: 2
MULTI SITE ROUTING (MSR)
In-VDN Time: 3
VDN Name: 4
Collected Digits: 5
Other LAI Information: 6