Filter
Top Products
DEFINITY ECS Release 8.2
Administrator’s Guide
555-233-506
Issue 1
April 2000
Screen reference
513CDR System Parameters
17
Record Outgoing Calls Only
Intra-Switch CDR
Suppress CDR for Ineffective Call Attempts
Ineffective call attempts are calls that are blocked because the user did not have
sufficient calling privileges or because all outgoing trunks were busy. This
includes the unavailable incoming or outgoing trunks due to trunk usage
allocation for ISDN Call-by-Call Service Selection trunks, incoming calls rejected
by the switch due to NSF mismatch, and ISDN calls that did not complete at the
far end, if a cause value was provided. These calls appear on the CDR record with
a condition code “E.”
Outg Trk Call Splitting
See ‘‘
Call Splitting’’ on page 1223 for more information.
Valid entries Usage
y
Enter y to record only outgoing calls. This can save space if
you are only concerned with charges for outbound calls.
n Enter n to record both outgoing and incoming calls.
Valid entries Usage
y/n
Enter y to record calls within the switch. If you choose this
option, you must complete the Intraswitch CDR screen to
indicate which extensions to monitor.
Valid entries Usage
y
Enter y to ignore ineffective call attempts. Use this if you have
limited storage space for CDR records and records often
overrun the buffer.
n Enter n to report ineffective call attempts. This can tell you if
your users are often unable to place outgoing calls, or if a large
number of incoming calls are not completed. You can also use
this if you need to have records of attempts to contact a client,
and are using ISDN trunks. Using this option requires more
space for records.
Valid entries Usage
y/n
Enter y to create separate records for each portion of outgoing
calls that are transferred or conferenced.