Filter
Top Products
DEFINITY ECS Release 8.2
Administrator’s Guide
555-233-506
Issue 1
April 2000
Routing outgoing calls
184Routing with multiple locations
8
Tip:
Use
display daylight-savings-rules
to see what rules have been
administered on your switch.
6. Type
312 in the Number Plan Area Code field in the Number 1 row.
In our example, 312 is the local area code for Chicago, location 1.
7. Type
New York in the Name field in the Number 2 row.
8. Type
-01:00 in the TimeZone Offset field in the Number 2 row.
In our example, subtract one hour from the system clock in Chicago to
provide the correct time for the location in New York.
9. Type
1 in the Daylight Savings Rule field in the Number 2 row.
In our example, daylight savings rule 1 applies to U.S. daylight savings
time, and both locations use the same rule.
10. Type
212 in the NANP field in the Number 2 row.
In our example, 212 is the local area code for New York, location 2.
11. Press
ENTER to save your changes.
Related topics
Refer to ‘‘
Setting the system date and time’’ on page 9 for more information about
how to set your system clock and specify the daylight savings rule for the location.
Refer to ‘‘
Establishing daylight savings rules’’ on page 7 for more information
about how to specify the dates and times of daylight savings rules.
Routing with multiple locations
When you set up multiple locations, you can define call routing that covers all
locations as well as call routing specific to each individual location. Use your
routing tables to define local routing for 911, service operators, local operator
access, and all local calls for each location. Leave long-distance and international
numbers that apply across all locations on the routing tables with location field set
to
all.
Before you start
Be sure the Multiple Locations field on the System-Parameters Customer-Options
screen is set to
y. If this field is set to n, contact your Lucent representative for
more information.