Filter
Top Products
DEFINITY ECS Release 8.2
Administrator’s Guide
555-233-506
Issue 1
April 2000
Screen reference
903Station
17
— One of the users on the port has B-channel voice and B-channel data
capability.
— One of the users on the port has no SPID assigned, which includes
telephones that have no SPID initialization capability.
— This field is display-only for H.323 set types. The system assigns an
"X" when the station is first administered.
R Balance Network
Recall Rotary Digit
This field only appears if type is 500 or 2500.
Redirect Notification
Valid entries Usage
y
Enter y to select the R Balance Capacitor network. In all other
cases except for those listed under
n, enter y.
n Enter n to select the standard resistor capacitor network. You
must complete this field if Off-Premise Station is
y. Enter n
when the station port circuit is connected to terminal equipment
(such as SLC carriers or impedance compensators) optioned for
600-ohm input impedance and the distance to the equipment
from the system is less than 3,000 feet.
Valid entries Usage
y/n
Enter y to allow the user of a rotary phone to dial the
administered Recall Rotary Digit to receive recall dial tone.
This will enable this user to perform conference and transfer
operations.
You establish the Recall Rotary Digit on the Feature-Related
System Parameters screen.
Valid entries Usage
y/n
Enter y to give a half ring at this phone when calls to this
extension are redirected (via Call Forwarding or Call
Coverage).
Enter
y if LWC Reception is audix.