Filter
Top Products
DEFINITY ECS Release 8.2
Administrator’s Guide
555-233-506
Issue 1
April 2000
Screen reference
832Multifrequency-Signaling-Related System Parameters
17
Number of Incoming ANI Digits
Number of Outgoing ANI Digits
This field applies to Russian shuttle trunks, and MFC and MFE trunks.
Truncate Station Number in ANI
This field applies to Russian shuttle trunks, and MFC and MFE trunks.
ANI Source for Forwarded Calls
Valid entries Usage
0
to 15 Enter the number of ANI digits for incoming MFC calls.
Valid entries Usage
0
to 15 Enter the number of ANI digits for outgoing MFC calls.
In India or any country where end-of-ani and end-of-digits are
not defined for Tones to CO on Outgoing Forward Calls – Group
I, DEFINITY ECS appends ANI-Not-Available digits to ANI
digits if the actual ANI length is less than the number entered in
this field.
If end-of-ani or end-of-digits are defined, this field is used in
conjunction with Truncate Station Number in ANI as a
maximum ANI length.
For India, even if the length of ANI is defined, if the timeout
occurs during the ANI collection, the call is routed with the ANI
digits already collected.
Valid entries Usage
beginning
ending
no
This field defines the side of the extension number from which
to truncate when station ANI is sent to the CO and the
combined length of the ANI prefix and extension number is
greater than Number of Outgoing ANI Digits. The ANI prefix
(either MFC or COR) is not truncated. There is no effect if
ANI for PBX is sent.
Valid entries Usage
caller
Send the calling party’s ANI when calls are redirected.
forwarder
Send the forwarding party’s ANI when calls are redirected.