Filter
Top Products
DEFINITY ECS Release 8.2
Administrator’s Guide
555-233-506
Issue 1
April 2000
Managing trunks
363Administering trunks for listed directory numbers
12
Let’s take the 3 businesses listed above as an example. Let’s assume your switch
receives 4 digits from the central office on a DID trunk group and that you’re not
using Tenant Partitioning. To make these calls to different listed directory
numbers terminate to your attendant group:
1. Type
change listed-directory-numbers and press ENTER.
The Listed Directory Numbers
screen appears.
2. In the Ext 1 field type
2020.
This is the LDN for Company A.
3. Type
Company A in the Name field.
This name will appear on the console display so the attendant knows which
business the call is for and how to answer it.
4. Repeat steps 2 and 3 for the other two businesses.
You can enter up to 20 different listed directory numbers on this screen.
5. Press
ENTER to save your changes.
To make LDN calls over a CO or FX trunk group terminate to an attendant group,
you must type attd in the Incoming Destination field on the Trunk Group form for
that group.
When you use the Listed Directory Number screen to assign some extensions to
the attendant group, or when you enter
attd in the Incoming Destination field on
the Trunk Group screen for CO or FX trunks, DEFINITY ECS treats these calls as
LDN calls.
Related topics
Refer to ‘‘
Listed Directory Numbers’’ on page 1411 for detailed information
about this feature.
Page 1 of 2
LISTED DIRECTORY NUMBERS
Night Destination:
Ext Name TN
1: 2020 Company A 1
2: 1000 Company B 1
3: 1111 Company C 1
4: 1
5: 1
6: 1
7: 1
8: 1
9: 1
10: 1