Lucent Technologies 8.2 Security Camera User Manual


  Open as PDF
of 1707
 
DEFINITY ECS Release 8.2
Administrator’s Guide
555-233-506
Issue 1
April 2000
Managing multimedia calling
224Multimedia Applications Server Interface
9
The following are the CDR capabilities of MASI. Administration information is
under the heading ‘‘
How to administer MASI’’ on page 208.
Incoming/Outgoing Trunk Call Splitting
Call splitting does not produce separate records for MMCX calls that are
transferred or conferenced.
Intraswitch CDR
You can administer intraswitch CDR to monitor MASI terminals. To do
this, simply add the MASI terminal extension on the Intraswitch CDR
form. DEFINITY then monitors calls from MASI terminals to other MASI
terminals, and calls between MASI terminals and DEFINITY stations.
CDR Privacy
You can administer a MASI terminal for CDR Privacy.
Account Code Dialing and Forced Entry of Account Codes
This is not supported for MASI terminals. Therefore, make sure the COR
you assign does not force entry of account codes.
Trunk CDR
You can get call detail records for all incoming and outgoing calls made
over MMCX interfaces.
Call redirection / Voice-messaging access
MMCX users can enter a DEFINITY extension, including an AUDIX hunt group,
Callmaster agent, attendant console or telephone as their coverage point.
If AUDIX is established as the MASI terminal’s coverage point, the MASI
terminal receives message waiting indication, and dials the AUDIX hunt group
extension to retrieve messages. Once connected to AUDIX, operation for the
MMCX user is the same as for a DEFINITY station user, including use of # to
identify the extension, if desired.
NOTE:
It is not possible to determine the call coverage status of a MASI terminal.
DEFINITY tracks calls to MASI terminals that follow the autonomous coverage
path from the MASI terminal. MMCX calls redirected to DEFINITY stations
contain display information.
MASI terminals that dial AUDIX directly, or that place calls to MASI terminals
that cover to AUDIX, do not receive ringback if all AUDIX ports are busy.
Instead, these callers see a message that the called party is busy, and the call drops.