Filter
Top Products
DEFINITY ECS Release 8.2
Administrator’s Guide
555-233-506
Issue 1
April 2000
Screen reference
467Access Endpoint
17
Access Endpoint
This screen administers Access Endpoints and Wideband Access endpoints.
NOTE:
You can administer Wideband Access Endpoints only if, on the
System-Parameters Customer-Options screen, the Wideband Switching field
is
y.
An Access Endpoint is a nonsignaling trunk that neither responds to signaling nor
generates signaling. Access Endpoints eliminate the need to dedicate an entire
trunk group for the access of a single trunk by providing the capability to assign
an extension number to a single trunk. An Access Endpoint can be specified as the
Originator or Destination endpoint of an administered connection.
A Wideband Access Endpoint (WAE) is an endpoint application connected to
line-side non-ISDN T1 or E1 facilities and, like Access Endpoints, have no
signaling interface with the system. For information on endpoint applications
connected to line-side ISDN-PRI facilities, see ‘‘
PRI Endpoint’’ on page 853.
The WAE is defined by a starting port (DS0) and a width specifying the number of
adjacent nonsignaling DS0s (positioned within a DS1 facility) that make up the
endpoint. This width may be between 2 and 31 adjacent DS0s.
NOTE:
Access Endpoints and Wideband Access Endpoints consume the same
resources that trunks use. Thus, the sum of Access Endpoints and trunks
cannot exceed the maximum number of trunks available in your system
configuration.
Field descriptions for page 1
Screen 31. Access Endpoint screen
add access-endpoint next Page 1 of 1
ACCESS ENDPOINT
Extension: 30001 (Starting) Port:_______
Communication Type: voice-grade-data Name:_____________
COR: 1 COS: 1
TN: 1 ITC: restricted