Filter
Top Products
DEFINITY ECS Release 8.2
Administrator’s Guide
555-233-506
Issue 1
April 2000
Collecting billing information
447Receiving call-charge information
16
2. In the CDR Reports field, type y.
This ensures that the AOC information appears on the CDR report.
3. Verify that Service Type is
public-ntwrk.
4. In the Supplementary Service Protocol field, type a.
5. The Charge Advice field, type
end-on-request.
This ensures that the switch will place one request for charge information.
This reduces the amount of information passed to the switch and consumes
less processor time than other options.
6. Press
ENTER to save your changes.
Receiving call-charge information over
non-ISDN trunks
In this example, we will administer an existing DIOD trunk to receive PPM from
the public network.
1. Type
change trunk-group 3.
The Trunk Group screen appears with existing administration for this trunk
group.
Page 1 of x
TRUNK GROUP
Group Number: 2 Group Type: isdn CDR Reports: y
Group Name: OUTSIDE_CALL_______________ COR: 1_ TN: 1__ TAC: ____
Direction: two-way_ Outgoing Display? n
Dial Access? n Busy Threshold: 99_ Night Service: ____
Queue Length: 0__
Service Type: public-ntwrk Auth Code? n TestCall ITC: rest
Far End Test Line No: _______________
TestCall BCC: 4
TRUNK PARAMETERS
Codeset to Send Display: 6 Codeset to Send TCM,Lookahead: 6
Max Message Size to Send: 260 Charge Advice: none_____________
Supplementary Service Protocol: a Digit Handling(in/out):enbloc/enbloc
Trunk Hunt: cyclical QSIG Value-Added Lucent? n
Connected to Toll? n STT Loss: normal DTT to DCO Loss: normal
Calling Number - Delete: ___ Insert: _______________ Numbering Format: _______
Bit Rate: 1200_ Synchronization: async Duplex: full
Disconnect Supervision - In? y Out? n
Answer Supervision Timeout: 0__