Filter
Top Products
DEFINITY ECS Release 8.2
Administrator’s Guide
555-233-506
Issue 1
April 2000
Screen reference
785ISDN-BRI Trunk Circuit Pack
17
SPID
A 12-digit field containing the SPID expected by the far end. DEFINITY ECS
blocks you from changing this field unless the port is busied out or
unadministered. The only protocol supported for SPID initialization is Bellcore
(Country Code 1). Trunks will not be put in service if SPID installation is not
successful.
Endpt ID
A 2-digit field containing the Endpoint Identifier expected by the far end.
DEFINITY ECS blocks you from changing this field unless the port is busied out
or unadministered.
Max NCA TSC
Port
This is a display-only field. It shows the port number to which parameters
administered on the row apply.
Directory Number
These 10-digit fields contain the directory numbers assigned to the interface,
which it views as being allocated to 2 separate endpoints.
Valid entries Usage
Any string of 1 to 12
digits
Leading zeroes considered significant and not
ignored
Valid entries Usage
00
to 62 Leading zeroes considered significant and not ignored.
Valid entries Usage
0
through 63. This 2-digit field gives the maximum number of
Non-Call-Associated Temporary Signaling Connections
allowed on this BRI D-channel. This field’s function is the
same as the field with the same name on the Signaling Group
screen.
Valid entries Usage
Any string of
1 to 10 digits
These fields must be administered in pairs. That is, if you enter a
value in one field, you must enter a value in the other.