Filter
Top Products
DEFINITY ECS Release 8.2
Administrator’s Guide
555-233-506
Issue 1
April 2000
Introduction to the DEFINITY system
28Setting up Music-on-Hold
2
2. In the Music/Tone On Hold field, type music.
The Port field appears.
3. In the Port field, type
6040.
This is the port address of the music source.
4. In the Music (or Silence) on Transferred Trunk Calls, type
all.
5. Press
ENTER to save your changes.
6. Now administer a class of restriction with Hear System Music on Hold set
to
y, to allow your local users to hear music on hold.
More information
If a call with either Data Privacy or Data Restriction activated is placed on hold,
the Music/Tone on Hold is withheld. This is to prevent transmission of a musical
tone that a connected data service might falsely interpret as a data transmission.
If you administer the Music/Tone on Hold field to provide music, the system
provides the music after a hunt group or ACD split delayed announcement.
change system-parameters features Page 1 of 9
FEATURE-RELATED SYSTEM PARAMETERS
Trunk-to-Trunk Transfer? none
Automatic Callback - No Answer Timeout Interval (rings): 4_
Call Park Timeout Interval (minutes): 10
Off-Premises Tone Detect Timeout Interval (seconds): 20_
AAR/ARS Dial Tone Required? y
Music/Tone On Hold: music Port: _______
Music (or Silence) On Transferred Trunk Calls: all
DID/Tie/ISDN Intercept Treatment: attd
Messaging Service Adjunct (MSA) Connected? y
Internal Automatic Answer for Attendant Extended Calls? y
Automatic Circuit Assurance (ACA) Enabled? y
ACA Referral Calls: local
ACA Referral Destination: ________
ACA Short Holding Time Originating Extension: ______
ACA Long Holding Time Originating Extension: ______
Abbreviated Dial Programming by Assigned Lists:
Auto Abbreviated/Delayed Transition Interval(rings):