Filter
Top Products
DEFINITY ECS Release 8.2
Administrator’s Guide
555-233-506
Issue 1
April 2000
Screen reference
686Hospitality
17
Client Room Coverage Path Configuration
This indicates whether the server and the PMS exchange coverage path
information for guest stations.
Default Coverage Path for Client Rooms
This applies only to stations with a “client room” class of service in the
“occupied” mode. This field is used for transparent or ASCII mode. The value in
this field is also used during a translation save as the coverage path for each
station with “client room” class of service.
Forward PMS Message to INTUITY Lodging
This field is used only in ASCII mode.
Extension of PMS
Valid entries Usage
act-nopms
The message is acknowledged (MESSAGE ACK), but no
action is taken.
act-pms
If active (act-pms), the server and PMS exchange and accept
coverage path information. This field does not apply to normal
mode. When upgrading from a release that does not support this
feature, the field is set to
act-pms if the PMS protocol mode is
administered for transparent or ASCII mode.
Valid entries Usage
1
to 999 Enter the coverage path assigned when the server receives a
check-out message for a valid extension or a new check-in.
Valid entries Usage
y
PMS-to-INTUITY messages are sent through the server.
n PMS-to-INTUITY messages are sent directly to the Lucent
INTUITY Lodging system.
Valid entries Usage
Valid
extension
Enter the data extension number the server dials to access PMS.
Cannot be a VDN extension.