Filter
Top Products
DEFINITY ECS Release 8.2
Administrator’s Guide
555-233-506
Issue 1
April 2000
Screen reference
802Locations
17
Locations
Use the Locations screen to provide daylight savings time displays to users, to set
the area code for each location, and to administer different location information
for multiple switches. You can administer up to 44 location specifications
depending on the configuration of your switch if the Multiple Locations field is y
on the System Parameters Customer Options screen. Otherwise, information for
location 1 applies to all your switches.
Screen 157. Locations
ARS Prefix 1 Required for 10-Digit NANP Calls?
Number
Displays the location number (
1 to 44). Corresponding entries in each row define
the numbering plan and daylight savings rule for each location number.
Valid entries Usage
y/n
Enter y when a 1 must be dialed before all 10-digit NANP calls.
change locations Page 1 of 3
LOCATIONS
ARS Prefix 1 Required for 10-Digit NANP Calls? _
Number Name Timezone Daylight-Savings Number Plan
Offset Rule Area Code
1 ____________________ _ __:__ __ ___
2 ____________________ _ __:__ __ ___
3 ____________________ _ __:__ __ ___
4 ____________________ _ __:__ __ ___
5 ____________________ _ __:__ __ ___
6 ____________________ _ __:__ __ ___
7 ____________________ _ __:__ __ ___
8 ____________________ _ __:__ __ ___
9 ____________________ _ __:__ __ ___
10 ____________________ _ __:__ __ ___
11 ____________________ _ __:__ __ ___
12 ____________________ _ __:__ __ ___
13 ____________________ _ __:__ __ ___
14 ____________________ _ __:__ __ ___