Lucent Technologies 8.2 Security Camera User Manual


  Open as PDF
of 1707
 
DEFINITY ECS Release 8.2
Administrator’s Guide
555-233-506
Issue 1
April 2000
Screen reference
476Alias Station
17
Alarm Threshold
Only appears if an entry in the Alarm Type field is other than
none. Enter the
number of times an attempt to establish or reestablish an AC must fail
consecutively before an AC alarm generates. (an alarm will be generated after the
fourth retry has failed, thus, with the retry interval of 2 minutes, an alarm will be
generated approximately 8 minutes after the first failure occurs).
Retry Interval
Auto Restoration
Priority
Enter a number that is to be used to determine the order in which ACs are to be
established.
Alias Station
This screen allows you to configure the system so that you can administer new
phone types that are not supported by your system software. This screen maps
new telephone models to a supported telephone model. This mapping does not
guarantee compatibility, but allows nonsupported models to be administered and
tracked by their own names.
Valid entries Usage
1
through 10 An alarm generates on the first failure if this field is 1.
Valid entries Usage
1
through 60 Enter the number of minutes between attempts to establish or
reestablish the AC
Valid entries Usage
y Enter y to indicate an attempt is to be made to reestablish an
AC that failed. Auto Restoration is available only for an AC
that is established over an ISDN Software Defined Data
Network (SDDN) trunk group. A
y in this field is ignored in all
other situations.
Valid entries Usage
1
through 8 1 is the highest and 8 the lowest priority