Filter
Top Products
DEFINITY ECS Release 8.2
Administrator’s Guide
555-233-506
Issue 1
April 2000
Screen reference
480Announcements/Audio Sources
17
Announcements/Audio Sources
Use this screen to assign announcements to circuit packs and port locations.
Screen 35. Announcements/Audio Sources
Ext
~w
Suspend digit outpulsing until a dial tone is detected.
~p
Pause 1.5 seconds. (Used only for outgoing trunk calls. If used
internally, the 1.5 second pause is ignored.)
~m
Digits following this character are for end-to-end signaling.
Following digits to be outpulsed as tones regardless of type of
trunk signaling, pulse, or tone.
Valid entries Usage
1 to 5 digits Enter the extension you assign to this announcement. The
following screens can reference this extension: Hunt Group,
Coverage Path, Trunk Group (Incoming Destination and Night
Destination), Vector, Feature-Related System Parameters
(DID/Tie/ISDN Intercept Treatment, Controlled Restriction)
Valid entries Usage
change announcements Page 1 of X
ANNOUNCEMENTS/AUDIO SOURCES
Ext. Type COR TN Name Q QLen Pro Rate Port
1: _____ _________ 1_ 1_ ________________________ n
2: _____ _________ 1_ 1_ ________________________ n
3: _____ _________ 1_ 1_ ________________________ n
4: _____ _________ 1_ 1_ ________________________ n
5: _____ _________ 1_ 1_ ________________________ n
6: _____ _________ 1_ 1_ ________________________ n
7: _____ _________ 1_ 1_ ________________________ n
8: _____ _________ 1_ 1_ ________________________ n
9: _____ _________ 1_ 1_ ________________________ n
10: _____ _________ 1_ 1_ ________________________ n
11: _____ _________ 1_ 1_ ________________________ n
12: _____ _________ 1_ 1_ ________________________ n
13: _____ _________ 1_ 1_ ________________________ n
14: _____ _________ 1_ 1_ ________________________ n
15: _____ _________ 1_ 1_ ________________________ n
16: _____ _________ 1_ 1_ ________________________ n