Filter
Top Products
DEFINITY ECS Release 8.2
Administrator’s Guide
555-233-506
Issue 1
April 2000
Screen reference
460Abbreviated Dialing List
17
Size (multiple of 5)
The number of dial code list entries you want in this list.
Privileged
Indicates whether users of this list can dial any number in the list, regardless of the
COR of the station from which they dial.
DIAL CODE
Enter the number you want the system to dial when users enter this dial code.
While the system is waiting, a call progress tone receiver is tied up, and, since
there are a limited number of receivers in the system, outgoing calling capability
may be impaired.
Vector Directory Number extension may also be assigned.
Group List
This screen implements the Abbreviated Dialing Group List. The Group Lists are
controlled by the System Administrator. Up to 100 numbers can be entered per
group list that can be accessed by users to place local, long-distance, and
international calls; to activate/deactivate features; or to access remote computer
equipment.
Valid entries Usage
5
to 100, in multiples of 5 Up to 100 entries per screen
Valid entries Usage
y/n
Set this field to n if you want the system to verify that this
station is allowed to dial this number.
Valid entries Usage
Digits 0 to 9 Up to 24 characters
* (star) Part of FAC
# (pound) Part of FAC
~p
Pause 1.5 seconds
~w
Wait for dial tone
~m
Change to outpulse DTMF digits at the end-to-end rate
~s
Start suppressing display of the digits being outpulsed
~W
Wait indefinitely for dial tone. Only use this if network
response time is more than 30 seconds