Filter
Top Products
DEFINITY ECS Release 8.2
Administrator’s Guide
555-233-506
Issue 1
April 2000
Screen reference
933System Parameters Customer-Options
17
locations (main and branch). Each branch location switches all of its incoming
calls to the centralized attendant positions over release link trunks (RLTs). The
calls are then extended back to the requested extension at the branch switch over
the same RLT. When the call is answered, the trunks to the main switch are
dropped and can be used for another call.
Change COR by FAC
Provides certain users the ability to change the class of restriction of local
extensions and local attendants via a phone by using a feature access code (FAC).
Cvg Of Calls Redirected Off-net
Provides continued monitoring for calls redirected to off-network (remote)
coverage points. Uses call classification via call classifier circuit pack or ISDN
trunk signaling.
DCS (Basic)
Provides transparent operation of selected features across a Distributed
Communications System (DCS). Users on one switch can use features located on
another switch. Includes 4- and 5-digit uniform dialing and 1–4 digit steering.
DCS Call Coverage
Provides DCS-based transparency of the call coverage feature across a DCS
network of switches.
DCS with Rerouting
Provides for rerouting calls transferred among DCS nodes, enabling rerouting of
the call for more effective use of facilities.
DEFINITY Network Admin
Indicates the switch is accessible by DEFINITY Network Administration.
Valid entries Usage
y
To invoke DCS with Rerouting
Valid entries Usage
y
To set value to y, enable ISDN-PRI (on page 2) and DCS
(Basic).
n