Filter
Top Products
DEFINITY ECS Release 8.2
Administrator’s Guide
555-233-506
Issue 1
April 2000
System basics
5Setting command permissions
1
Instructions
To log off:
1. Type
logoff and press RETURN.
If the Facility Test Calls or Remote Access features are administered,
Alarm origination is disabled, or if you have busied out resources or active
minor or major alarms, a security screen appears. You may want to take
appropriate action (for example, disable these features or address any
alarms) before you log off.
If none of the above special circumstances exist, the system logs you off.
2. At the
Proceed with Logoff prompt, type y to log off.
If you log off with alarm origination disabled and the system generates an
alarm, Lucent support services will not receive any notification of the
alarm. For more information about alarms, refer to the maintenance book
for your system.
Setting command permissions
DEFINITY ECS allows you to modify the permissions associated with a login.
The system maintains default permissions for each level of login, but you may
want to further restrict the login, or at least make sure the defaults are appropriate
for the user. The default values for these fields vary based on the login type.
When set to y, the permissions on the Command Permission Categories screen
apply for any object that is not restricted. The second and third pages of the
Command Permission Categories screen allow you to restrict the user from any
access to specified objects. If you want to limit a user’s permissions beyond those
on page one, enter the objects in this list. For example, if you want a user to be
able to add and change stations, but not VDNs, you can enter
y in the Administer
Stations field and the Additional Restrictions field. Then on page 2 or 3, enter vdn
as a restricted object.
Facility Test Call Administered
Remote Access Administered
Alarm Origination is currently disabled
Active major/minor alarm detected; be sure to resolve it
Proceed with Logoff? [n]