Lucent Technologies 8.2 Security Camera User Manual


  Open as PDF
of 1707
 
DEFINITY ECS Release 8.2
Administrator’s Guide
555-233-506
Issue 1
April 2000
Features and technical reference
1442Multifrequency Signaling
20
Authorization Codes
The COR of the authorization code as administered on the
authorization-code form is not used for ANI prefix determination, even if
the originating endpoint enters an authorization code before call processing
for an outgoing call seizes an outgoing trunk. If the originating endpoint is
an extension, the extension’s ANI is used. If the originating endpoint is an
incoming trunk, the ANI for PBX is used.
Bridging
The ANI of a telephone’s primary extension also applies to calls originated
from a bridged call appearance of that extension on another terminal. ANI
prefix and ANI truncation will still apply to the primary extension number
of bridged call appearances.
Call Detail Recording
CDR records ANI collected from incoming MF signaling.
For India MFC, on incoming calls, ANI digits may be appended with
zeroes if the actual ANI digits are less than the administered ANI-length; in
those cases, the zero-digits appear on CDR.
Call Redirection
A call is redirected if any of the following are active: Call Forwarding, Call
Coverage, Send All Calls, or Night Service.
Call Vectoring
Call Vectoring can now use ANI collected from incoming MFC signaling.
The ANI of a call vector is not used when a call vectoring route-to
command routes a call over an outgoing trunk. Instead, the ANI of the
originating party is sent.
DID No Answer Timer
DID No Answer Timer is applied to MF signaling DID calls.
Distributed Communications System (DCS)
In a DCS arrangement, the ANI sent to the CO is determined by the ANI
for PBX on PBX_B, but the category sent to the CO is determined by the
Category for MF ANI field on the Class of Restriction form for the
incoming DCS trunk or by the type of call.
Expert Agent Select (EAS)
For ANI, the EAS agent’s login extension number and COR overrides the
extension number and COR of the physical terminal where the agent is
logged in. ANI prefix and ANI truncation apply to logged in EAS agents.