Filter
Top Products
DEFINITY ECS Release 8.2
Administrator’s Guide
555-233-506
Issue 1
April 2000
Screen reference
717Hunt Group
17
Message Center
Enter the type of messaging adjunct for the hunt group. Only one hunt group in
the System can be administered as
msa, one as audix, one as qsig-mwi, one as
fp-mwi, and one as rem-audix.
Voicemail Number
Appears only if, on the System-Parameters Customer-Options screen, the Basic
Call Setup and Basic Supplementary Services fields are
y and the Message Center
field on this screen is
qsig-mwi or fp-mwi. The qsig-mwi selection shows the
complete number of the AUDIX hunt group on the Message Center switch for
QSIG MWI. The fp-mwi selection shows the public network number of the
AUDIX hunt group on the Message Center switch.
Routing Digits (e.g. AAR/ARS Access Code)
Appears only if the Message Center field is
qsig-mwi or fp-mwi. Shows the AAR
(most likely for a Message Center type of qsig-mwi) or ARS (most likely for a
Message Center type of fp-mwi) access code which when prepended to the
AUDIX Complete Number field defines a route to the Message Center switch hunt
group containing the line ports to the AUDIX.
Valid entries Usage
msa
Messaging Server Adjunct
rem-audix
DCS feature allowing AUDIX to be located on another
switch
audix
For AUDIX located on this switch
qsig-mwi
QSIG network allowing AUDIX to be located on another
switch
fp-mwi
Public network allowing AUDIX to be located on another
switch; administrable only when the ISDN Feature Plus field
on the System-Parameters Customer-Options screen is
y
none
Indicates the hunt group does not serve as a message hunt
group.
Valid entries Usage
Up to 17 digits Enter the complete AUDIX dial-up number.
Valid entries Usage
This field cannot be blank.