Filter
Top Products
DEFINITY ECS Release 8.2
Administrator’s Guide
555-233-506
Issue 1
April 2000
Screen reference
971Trunk Group
17
CDR Reports
NOTE:
For ISDN trunk groups, the Charge Advice field affects CDR information.
For CO, DIOD, FX, and WATS trunk groups, the Analog PPM field affects
CDR information.
Group Name
COR
Valid entries Usage
y
All outgoing calls on this trunk group will generate call detail
records. If the Record Outgoing Calls Only field on the CDR
System Parameters screen is n, then incoming calls on this
trunk group will also generate call detail records.
n
Calls over this trunk group will not generate call detail records.
r (ring-intvl) CDR records will be generated for both incoming and outgoing
calls. In addition, the following ringing interval CDR records
are generated:
■ Abandoned calls: The system creates a record with a
condition code of “H,” indicating the time until the call was
abandoned.
■ Answered calls: The system creates a record with a
condition code of “G,” indicating the interval from start of
ring to answer.
■ Calls to busy stations: The system creates a record with a
condition code of “I,” indicating a recorded interval of 0.
Valid entries Usage
1 to 27
characters
Enter a unique name that provides information about the trunk
group. Don’t use the default entry or the group type (DID,
WATS) here. For example, you might use names that identify
the vendor and function of the trunk group: USWest Local;
Sprint Toll, etc.
Valid entries Usage
0
to 95 Enter a class of restriction (COR). Classes of restriction control
access to trunk groups, including trunk-to-trunk transfers.