Filter
Top Products
DEFINITY ECS Release 8.2
Administrator’s Guide
555-233-506
Issue 1
April 2000
Managing multimedia calling
222Multimedia Applications Server Interface
9
2. The MMCX dial plan must use the same feature access codes as the
DEFINITY ECS. If this is not already the case, modify the MMCX dial
plan using the
chgdp command. See the MMCX Technical Reference for
more information.
3. Include this feature access code in the
chgmasi command.
CDR
1. To get call detail records for calls over MMCX interfaces, set
CDR Reports = y on the MASI Trunk Group form.
2. To get call records for calls over the ISDN-PRI trunk group, set
CDR Reports = y on the ISDN-PRI Trunk Group form.
3. To track calls between a MASI terminal and other MASI terminals or
DEFINITY stations, enter the MASI terminal extension on the Intraswitch
CDR form.
4. Enter n in the Record Non-Call Assoc TSC field on the CDR System
Parameters form.
NOTE:
If you use the same PRI trunks for MASI and non-MASI calls, it is strongly
recommended that you do not enable CDR for these calls. Establish a
separate trunk group for non-MASI calls and set CDR Reports = n.
Coverage
To establish coverage from a MASI terminal to AUDIX:
1. Use the MMCX user interface to enter the AUDIX hunt group extension as
the coverage point. You cannot use DEFINITY coverage administration for
MASI terminals.
2. If AUDIX ports are not administered on DEFINITY, do so.
3. Set up the MASI terminal as an AUDIX subscriber. Enter the MASI
terminal extension in the extension field on the Subscriber Administration
form.
To establish coverage from a MASI terminal to another MMCX terminal or
DEFINITY station:
1. Use the MMCX user interface to enter the desired extension as the
coverage point for the MASI terminal. You cannot use DEFINITY
coverage administration for MASI terminals.
Step 11 — Verify administration
Make test calls from DEFINITY to MMCX, ensure that you can indeed place and
receive calls.