Filter
Top Products
DEFINITY ECS Release 8.2
Administrator’s Guide
555-233-506
Issue 1
April 2000
Screen reference
465Abbreviated Dialing List
17
DIAL CODE
Enter the number you want the system to dial when users enter this dial code.
While the system is waiting, a call progress tone receiver is tied up, and, since
there are a limited number of receivers in the system, outgoing calling capability
may be impaired.
Only DIAL CODEs 1 through 5 are displayed initially. If you enter a number
greater than 5 in the Size field, the system increases the number of dial codes to
the number you specified.
Vector Directory Number extension may also be assigned.
7103A Button List
This screen assigns abbreviated dialing numbers to the 7103A phone buttons. The
entries can then be accessed by 7103A phone users to place local, long-distance,
and international calls; activate/deactivate features; or to access remote computer
equipment. This screen applies only to 7103A fixed feature phones. Only one
7103A abbreviated dialing list can be implemented in the system and it applies to
all 7103A fixed feature phones in the system. This list is controlled by the System
Administrator.
Valid entries Usage
Digits 0 to 9 Up to 24 characters
* (star) Part of FAC
# (pound) Part of FAC
~p
Pause 1.5 seconds
~w
Wait for dial tone
~m
Change to outpulse DTMF digits at the end-to-end rate
~s
Start suppressing display of the digits being outpulsed
~W
Wait indefinitely for dial tone. Only use this if network
response time is more than 30 seconds