Filter
Top Products
DEFINITY ECS Release 8.2
Administrator’s Guide
555-233-506
Issue 1
April 2000
Features and technical reference
1543Tenant Partitioning
20
Administration of the following features requires special care to avoid undesired
intertenant access.
■ Bridging
■ Call Pickup
■ Call Vectoring
■ Controlled Restriction
■ Facility Busy Indication
■ Facility Test Calls
■ Integrated Directory
■ Inter-PBX Attendant Calls
■ Main/Satellite/Tributary
■ Malicious Call Trace
■ Personal CO line
■ Private Networking (AAR)
■ Service Observing
■ Uniform Dial Plan
The function of any feature that specifies a tenant partition is affected by
tenant-to-tenant restrictions, as follows.
■ AAR/ARS
Do not confuse tenant partitions with Time-of-Day Plan Numbers and
Partition Groups in AAR/ARS. You can still use Time-of-Day Plan
Numbers and Partition Groups can still be used to select one of eight route
patterns for AAR/ARS routing when Tenant Partitioning is in effect.
■ Attendant and Attendant Group Features
Tenant Partitioning creates multiple attendant groups. Attendant operations
such as direct-station or trunk-group select (DCS/DTGS) are subject to
tenant-to-tenant restrictions, both at selection time and at split time.
All calls put on hold by an attendant from the attendant group hear the
music source from the attendant group.
■ Attendant Control of Trunk-Group Access
An attendant group controls access only to trunk groups that belong to
tenants that are served by that attendant group.