Filter
Top Products
DEFINITY ECS Release 8.2
Administrator’s Guide
555-233-506
Issue 1
April 2000
Screen reference
758ISDN trunk group
17
Path Replacement Method
Appears when either the ISDN-PRI trunk or the ISDN-BRI trunk fields and the
Basic Call Setup and Supplementary Services with Rerouting fields are set to
y on
the System-Parameters Customer-Options screen and when the Supplementary
Service Protocol is either
b or e and the Group Type field is isdn on the ISDN
trunk group screen.
Replace Restricted Numbers
Appears when the Group Type field is
isdn. Indicates whether to replace restricted
numbers with administrable strings for incoming and outgoing calls assigned to
the specified trunk group. This field applies to BRI and PRI trunks.
Replace Unavailable Numbers
Appears when the Group Type field is
isdn. Indicates whether to replace
unavailable numbers with administrable strings for incoming and outgoing calls
assigned to the specified trunk group. This field applies to BRI and PRI trunks.
Send Called/Busy/Connected Number
This field appears only if the QSIG Value-Added Lucent field on the Trunk Group
screen is
y and the Group Type field is isdn. Specifies if the connected party’s
number is sent on incoming or tandemed ISDN calls. Valid entries are
y, n, or r
(restricted). If set to
y, the ISDN Numbering - Public/Unknown Format screen is
accessed to construct the actual number sent, or the ISDN Numbering-Private
screen (based on Numbering Format) is used. If set to
r, the connected number is
sent “presentation restricted.”
Valid entries Usage
better-route
Uses the most economical route, for example, the reconfigured
call does not use the same trunk group as the original call.
always
Always reconfigures the call regardless of the trunk group used.
Valid entries Usage
y/n
Enter y for the display to be replaced regardless of the service
type of the trunk.
Valid entries Usage
y/n
Enter y for the display to be replaced regardless of the service
type of the trunk.